Clear communication is really important in the busy environment of a construction site. Good signage helps keep everyone safe while ensuring smooth operations. McConnell Dowell project site signage templates allow for the consistent application of the McConnell Dowell brand on all of our sites. The templates are used to clearly identify our sites, designate and direct people to different areas within a site, and makes people aware of any hazards present.
Downloadable assets at bottom of page
It is intended that the templates below will cover most requirements for signs and posters on our project sites, however, if you have any particular requests not covered, or you may be unsure about anything, then please contact the McConnell Dowell Brand and Marketing team for further information.
McConnell Dowell branding should be clearly visible on public facing fences and signage wherever practical. For more permanent settings, our logo may be applied to solid painted wooden hoardings. For more impact, a printed banner that includes the McConnell Dowell logo and dynamic beams may be attached to wooden hoardings. For more temporary scenarios a printed repeat pattern bannermesh can be installed.





Ready-to use templates exist for these main site identification and safety signs.
Please note: Our brand font ‘Circular’ is used on these signs, but Arial font (both Bold and regular) is an acceptable replacement if you do not have Circular installed.


Principal contractor with PPE
Dimensions: 2400 x 1200 mm


Principal contractor with PPE
Dimensions: 1200 x 600 mm






Principal contractor with map and PPE
Dimensions: 2400 x 1200 mm


Principal contractor with map and PPE
Dimensions: 1200 x 600 mm






Principal contractor door sign with PPE
Dimensions: 600 x 900 mm


Principal contractor door sign with map with PPE
Dimensions: 600 x 900 mm


Principal contractor door sign with map
Dimensions: 600 x 900 mm


Construction work in progress with PPE
Dimensions: 1200 x 600 mm




Gate Number
Dimensions: 600 x 900 mm
Minimum permit to work requirements
Dimensions: 3000 x 840 mm




Hazards Board
Dimensions: 800 x 1150 mm


Wear Mask
Dimensions: (A2) 420 x 594 mm


Site Office
Dimensions: 600 x 450 mm


Site Signs Template
Dimensions: 435 x 310 mm


Example layouts
Print-ready artwork for display of HSE posters and signage on project sites.
HSE noticeboards should be produced professionally as magnetic whiteboards, displayed with magnetic frames placed over the corresponding poster on layout guide in the artwork


HSE Notice Boards – 5 kinds including:
Incident and Emergency Response board
HSE board
HSE Policies and Procedures board
Environment & Sustainability board
HSE Alerts board
Produced as a magnetic whiteboard
Dimensions: 2000 x 1400 mm


Example layout with magnetic frames placed over layout guide


After Action Review Board
Produced as a magnetic whiteboard
Dimensions: 1600 x 1200 mm


See Say Do Feedback Board
Produced as a magnetic whiteboard
Dimensions: 1600 x 1200 mm
A4 print-ready artwork for each of the HSE posters


Dimensions: (A4) 210 x 297 mm
Values posters should be displayed prominently on all projects and sites.
These comprise of a set of 6 posters, preferably displayed at A2 size, but A3 size also available.




Download the complete McConnell Dowell site signage suite containing print ready files as PDFs.
Site signs will need to be edited to reflect the project/site they pertain to. Use Adobe Acrobat to do this.
Any issues email: marketingandcommunciations@mcdgroup.com